Keeping (USB, etc) cords from unplugging from extensions?
Moderators: Bakhtosh, EvilHomer3k
- Blackhawk
- Posts: 43501
- Joined: Tue Oct 12, 2004 9:48 pm
- Location: Southwest Indiana
Keeping (USB, etc) cords from unplugging from extensions?
Does anybody have a handy trick for locking two cords together? I've got some cords (USB, etc) that I use an extension with, but they hang vertically and I'd like to keep the weight of the cords themselves from unplugging them when jostled. I can think of ways of locking them together permanently (or semi-permanently.) Zip ties would work for that. But I need to be able to unplug them from time to time by hand, so I need something that can be removed and put back. I've seen commercial solutions, but they're expensive.
Has anybody solved this particular riddle?
/edit - this is electronic cords, not shop cords. I'm not interested in tying them in a knot and degrading the expensive cables.
Has anybody solved this particular riddle?
/edit - this is electronic cords, not shop cords. I'm not interested in tying them in a knot and degrading the expensive cables.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
- Blackhawk
- Posts: 43501
- Joined: Tue Oct 12, 2004 9:48 pm
- Location: Southwest Indiana
Re: Keeping (USB, etc) cords from unplugging from extensions?
I may actually have thought of a solution after posting.
I'm going to take two zip ties, form one into a small loop, and use the other to fasten the loop right behind the plug on each cable. So each cable will effectively have a round ring right where the wire goes into the plug (so the rings will be a couple of inches apart when the two are plugged together.) Then I can get a velcro cable tie and hook the two loops together, pulling them tight. If done right, it will transfer the force - or a good bit of the force - around the plugs' connection (which is just friction), and I would just need to remove the velcro to 'unlock' them.
I'm going to take two zip ties, form one into a small loop, and use the other to fasten the loop right behind the plug on each cable. So each cable will effectively have a round ring right where the wire goes into the plug (so the rings will be a couple of inches apart when the two are plugged together.) Then I can get a velcro cable tie and hook the two loops together, pulling them tight. If done right, it will transfer the force - or a good bit of the force - around the plugs' connection (which is just friction), and I would just need to remove the velcro to 'unlock' them.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
- dbt1949
- Posts: 25688
- Joined: Wed Oct 13, 2004 12:34 am
- Location: Hogeye Arkansas
Re: Keeping (USB, etc) cords from unplugging from extensions?
I have a USB cable that is spring retractable. Just that one but such things do exist.
https://www.amazon.com/s?k=retractable+ ... doa-p_2_15
https://www.amazon.com/s?k=retractable+ ... doa-p_2_15
Last edited by dbt1949 on Sun Feb 28, 2021 5:28 pm, edited 1 time in total.
Ye Olde Farte
Double Ought Forty
aka dbt1949
Double Ought Forty
aka dbt1949
- Isgrimnur
- Posts: 82094
- Joined: Sun Oct 15, 2006 12:29 am
- Location: Chookity pok
- Contact:
Re: Keeping (USB, etc) cords from unplugging from extensions?
I've seen binder clips used to good effect.
It's almost as if people are the problem.
- Unagi
- Posts: 26376
- Joined: Wed Sep 20, 2006 5:14 pm
- Location: Chicago
Re: Keeping (USB, etc) cords from unplugging from extensions?
Can you tie a single knot into the two cord ends, and then attach them to each other. (This is not a tight knot)
I do this with my electric leaf blower, to its main extension cord.
So that I can put tension on the cord while using it and not yank it free.
I do this with my electric leaf blower, to its main extension cord.
So that I can put tension on the cord while using it and not yank it free.
- Blackhawk
- Posts: 43501
- Joined: Tue Oct 12, 2004 9:48 pm
- Location: Southwest Indiana
Re: Keeping (USB, etc) cords from unplugging from extensions?
No chance. I've done the same thing with power cords, but this is for a VR headset, and the cords are expensive.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
- TheMix
- Posts: 10904
- Joined: Thu Oct 14, 2004 5:19 pm
- Location: Broomfield, Colorado
Re: Keeping (USB, etc) cords from unplugging from extensions?
They make zip ties with a little circle on the end for a screw. I got one from somewhere, but I haven't actually tried using the screw. But it might let you zip tie the cords, and then screw the zip tie into the wall below the devices to hold it stationary.
Black Lives Matter
Isgrimnur - Facebook makes you hate your friends and family. LinkedIn makes you hate you co-workers. NextDoor makes you hate your neighbors.
- Paingod
- Posts: 13132
- Joined: Wed Aug 25, 2010 8:58 am
Re: Keeping (USB, etc) cords from unplugging from extensions?
Plug the two ends together and then delicately wind an entire roll of electrical tape up and down the cables, radiating out from the point of contact. Layer this until you've run out of electrical tape.
... the only good suggestions I had were already posted or ruled out.
... the only good suggestions I had were already posted or ruled out.
Black Lives Matter
2021-01-20: The first good night's sleep I had in 4 years.
2021-01-20: The first good night's sleep I had in 4 years.
- The Meal
- Posts: 27987
- Joined: Tue Oct 12, 2004 10:33 pm
- Location: 2005 Stanley Cup Champion
Re: Keeping (USB, etc) cords from unplugging from extensions?
I have a suggestion in the other direction, but I'm not sure how well it may apply. But how about a connection that is magnetic-only that has the intention of disconnecting as easy as possible (ensuring no damage to any cabling or attached devices in the case of the cord being stretched too far).
I had a different end-goal in mind, but I recently changed over my devices-which charge to this product:
The obvious-to-me downside is that this device only allows charge to carry through, not data. The particular product I linked also only changes the interface at the device (i.e., replacing the mini-usb connection with their own magnet connector), but maybe something similar exists for whatever mid-way connections you're already using (or at the VR headset device plug-in, if it's not a hard-wired cable). The final obvious downside is that this product costs money (though is not particularly outrageous, IMO, but your financial situation is your own and I don't imply how you should be spending your money—just listing an alternative option for you to consider).
I had a different end-goal in mind, but I recently changed over my devices-which charge to this product:
The obvious-to-me downside is that this device only allows charge to carry through, not data. The particular product I linked also only changes the interface at the device (i.e., replacing the mini-usb connection with their own magnet connector), but maybe something similar exists for whatever mid-way connections you're already using (or at the VR headset device plug-in, if it's not a hard-wired cable). The final obvious downside is that this product costs money (though is not particularly outrageous, IMO, but your financial situation is your own and I don't imply how you should be spending your money—just listing an alternative option for you to consider).
"Better to talk to people than communicate via tweet." — Elontra
- Blackhawk
- Posts: 43501
- Joined: Tue Oct 12, 2004 9:48 pm
- Location: Southwest Indiana
Re: Keeping (USB, etc) cords from unplugging from extensions?
Yeah, some of this was my fault for vague descriptions. I originally wrote the text for elsewhere where I don't want nosiness and just copied it here.
As I mentioned, it's for VR. It's one USB 3 cable and one DisplayPort cable (so it's data, and USB-only solutions won't work), and it will be running vertically from a PC tower on the floor to the ceiling to use with a cable management system in a few weeks.
Sorry if the badly worded question led to wasted effort. You may commence the beating of the me.
As I mentioned, it's for VR. It's one USB 3 cable and one DisplayPort cable (so it's data, and USB-only solutions won't work), and it will be running vertically from a PC tower on the floor to the ceiling to use with a cable management system in a few weeks.
Sorry if the badly worded question led to wasted effort. You may commence the beating of the me.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
- Anonymous Bosch
- Posts: 10512
- Joined: Thu Oct 14, 2004 6:09 pm
- Location: Northern California [originally from the UK]
Re: Keeping (USB, etc) cords from unplugging from extensions?
"There is only one basic human right, the right to do as you damn well please. And with it comes the only basic human duty, the duty to take the consequences." — P. J. O'Rourke
- gilraen
- Posts: 4313
- Joined: Wed Sep 04, 2013 7:45 pm
- Location: Broomfield, CO
Re: Keeping (USB, etc) cords from unplugging from extensions?
Can't say that I've tried it, but in theory you may be able to use reusable cable zip ties (something like this) in a similar fashion as regular zip ties.
P.S. Talk about a permanent solution
- LawBeefaroni
- Forum Moderator
- Posts: 55316
- Joined: Fri Oct 15, 2004 3:08 pm
- Location: Urbs in Horto, outrageous taxes on everything
Re: Keeping (USB, etc) cords from unplugging from extensions?
Wrap the end (plug area) of each cable with a velcro tie, keeping hook or loop exposed (same for each cable). Use adhesive to secure to cable if necessary/preferred.
With a wide piece of the opposite hook or loop, wrap both cables, securing them together.
In essence it's like duct taping them together except you can remove the velcro.
With a wide piece of the opposite hook or loop, wrap both cables, securing them together.
In essence it's like duct taping them together except you can remove the velcro.
" Hey OP, listen to my advice alright." -Tha General
"No scientific discovery is named after its original discoverer." -Stigler's Law of Eponymy, discovered by Robert K. Merton
MYT
"No scientific discovery is named after its original discoverer." -Stigler's Law of Eponymy, discovered by Robert K. Merton
MYT
- Jaymon
- Posts: 3006
- Joined: Wed Sep 10, 2008 12:51 pm
Re: Keeping (USB, etc) cords from unplugging from extensions?
There is a product
https://tethertools.com/product/jerksto ... sion-lock/
I haven't used it personally, but it seems to do what you need. Lock two cables together so they don't pull apart, but you can still undo it by hand.
https://tethertools.com/product/jerksto ... sion-lock/
I haven't used it personally, but it seems to do what you need. Lock two cables together so they don't pull apart, but you can still undo it by hand.
Bunnies like beer because its made from hops.
- Unagi
- Posts: 26376
- Joined: Wed Sep 20, 2006 5:14 pm
- Location: Chicago
Re: Keeping (USB, etc) cords from unplugging from extensions?
The hive is a wonderful mind.
- Blackhawk
- Posts: 43501
- Joined: Tue Oct 12, 2004 9:48 pm
- Location: Southwest Indiana
Re: Keeping (USB, etc) cords from unplugging from extensions?
That's an excellent solution. Basically coat both plugs with one side of the velcro, then use a wide piece of the other to wrap them! It beats my idea.LawBeefaroni wrote: ↑Mon Mar 01, 2021 1:54 pm Wrap the end (plug area) of each cable with a velcro tie, keeping hook or loop exposed (same for each cable). Use adhesive to secure to cable if necessary/preferred.
With a wide piece of the opposite hook or loop, wrap both cables, securing them together.
In essence it's like duct taping them together except you can remove the velcro.
I'd seen those. I'm not 100% confident they'll fit, though, and they're expensive enough that I don't really want to experiment and hope they'll do the job (they also may be too bulky.)Jaymon wrote: ↑Mon Mar 01, 2021 2:12 pm There is a product
https://tethertools.com/product/jerksto ... sion-lock/
I haven't used it personally, but it seems to do what you need. Lock two cables together so they don't pull apart, but you can still undo it by hand.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
- Blackhawk
- Posts: 43501
- Joined: Tue Oct 12, 2004 9:48 pm
- Location: Southwest Indiana
Re: Keeping (USB, etc) cords from unplugging from extensions?
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
- Kasey Chang
- Posts: 20750
- Joined: Sat Oct 30, 2004 4:20 pm
- Location: San Francisco, CA
- Contact:
Re: Keeping (USB, etc) cords from unplugging from extensions?
No need to go such fancy extremes. You just need two hook-n-loop cable ties (or 4 if you want to double up)
Put one on each end of the cables you need to mate. Use the hole provided so they form a loop around the end so they don't come off. Make them tight too.
Now just pull and bend until one end overlaps the other. Hook to loop (or vice versa. Overlap as much surface as possible.
If you need extra security, add two more hook-n-opp cable ties, then double up on the OTHER end as well. Now when you try to pull them apart, they won't due to the overlapped pieces of hook-n-loop, but you can undo quite easily.
Put one on each end of the cables you need to mate. Use the hole provided so they form a loop around the end so they don't come off. Make them tight too.
Now just pull and bend until one end overlaps the other. Hook to loop (or vice versa. Overlap as much surface as possible.
If you need extra security, add two more hook-n-opp cable ties, then double up on the OTHER end as well. Now when you try to pull them apart, they won't due to the overlapped pieces of hook-n-loop, but you can undo quite easily.
My game FAQs | Playing: She Will Punish Them, Sunrider: Mask of Arcadius, The Outer Worlds
- Kasey Chang
- Posts: 20750
- Joined: Sat Oct 30, 2004 4:20 pm
- Location: San Francisco, CA
- Contact:
Re: Keeping (USB, etc) cords from unplugging from extensions?
FWIW, I have the EARLIER generation of this product, the one with the flat head, not the round head, and those are data AND power.The Meal wrote: ↑Mon Mar 01, 2021 12:44 pm I have a suggestion in the other direction, but I'm not sure how well it may apply. But how about a connection that is magnetic-only that has the intention of disconnecting as easy as possible (ensuring no damage to any cabling or attached devices in the case of the cord being stretched too far).
I had a different end-goal in mind, but I recently changed over my devices-which charge to this product:
I think these round head ones are often referred to as Gen 3, and the flat head type as "Gen X". I can confirm Gen X is data and power, at least for MicroUSB and USB-C, not sure about Lightning.
My game FAQs | Playing: She Will Punish Them, Sunrider: Mask of Arcadius, The Outer Worlds